
142
CA575
Power Package Lay Up (continued)
CARBURETED MODELS
75844
WARNING
Avoid Fire or Explosion: Be sure engine compartment is well
ventilated and no gasoline vapors are present during the fol-
lowing operation.
1 Close the fuel shut-off valve, if so equipped. If no fuel shut off valve
is present, a suitable method must be employed to STOP the flow of
fuel from the fuel tank to the engine before proceeding.
2 Remove flame arrestor and start engine. While operating engine
at fast idle (1000-1500 rpm), fog internal surfaces of engine by
squirting approximately 8 ounces (227 g) of Quicksilver Storage Seal
(or if not available, SAE 20W motor oil) into carburetor bores. Squirt
the remaining 2 ounces (57 g) of Storage Seal (or oil) rapidly into
carburetor, just as the engine begins to stall, due to lack of fuel. Allow
engine to stop. Turn ignition key to OFF position.
Kommentare zu diesen Handbüchern