Mercury ALPHA Spezifikationen PDF herunterladen (Seite 107)

105

CA524

Lubrication

Steering System

1 If Steering Cable Has Grease Fittings: Turn steering until

steering cable is fully retracted into cable housing. Apply

approximately 3 pumps of grease from a typical hand-operated

grease gun. Lubricate at fitting with 2-4-C Marine Lubricant with

Teflon.

WARNING

Do not grease steering cable while extended. Hydraulic lock

could occur and cause loss of steering control.

NOTE: If steering cable does not have grease fitting, inner wire of

cable cannot be greased.

2 Turn steering until steering cable fully extended. Lubricate by

applying a thin coat of Special Lubricant 101 on exposed part of

cable.

3 Lubricate steering system pivot points with SAE 30W motor oil.

4 On dual engine boats: Lubricate all pivot points, including tie bar

pivot points, with SAE 30W motor oil.

5 Upon first starting engine, turn steering wheel several times to

starboard, and then port, to ensure that the steering system operates

properly, before getting underway.

CA923

Shift Cable - Typical

6 Lubricate pivot points with SAE 30W motor oil.

CB613

Throttle Cable

7 Lubricate pivot points with SAE 30W motor oil.

A Carbureted Models

B EFI Models

C MPI Models, excluding 7.4L MPI

D 7.4L MPI

INDEX

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 180 181

Keine Kommentare

Mercury ALPHA Spezifikationen Seite 107