Mercury XR2 Installationshandbuch PDF herunterladen (Seite 18)

- 18 -

4. Attach remote control harness plug to engine har-

ness plug. Reinstall harness plug in clip.

28237

a - Engine Harness Plug

b - Clip

Throttle Cable Adjustment (Using

Morse MV3 Control Box)

1. Insert throttle cable anchor in the top retainer hole

and close retainer cover.

2. With throttle arm in the idle position (against stop)

and remote control in forward (with no throttle

advance), rotate throttle cable end until it lines up

with anchor pin. Attach cable to pin and secure

with latch. Tighten jam nut.

a - Throttle Lever Anchor Pin

b - Barrel Retainer Cover

c - Jam Nut

Oil Injection System

1. Mount the oil reservoir in a suitable location. Use

the oil tank hold down kit provided.

28243

2. Oil hoses must be arranged so they cannot be-

come pinched, kinked, sharply bent or stretched

during operation of the engine.

3. Remove (and discard) the shipping cap from

hose fitting.

4. Connect oil hose from remote oil tank (hose with

blue stripe) to fitting. Secure with cable tie.

NOTE: The fitting barb on the vent does not get con-

nected to a hose.

5. Remove (and discard) shipping cap from pulse fit-

ting.

6. Connect the second oil hose from remote oil tank

to pulse fitting. Secure with sta-strap.

28237

a - Hose Fitting

b - Vent

c - Pulse Fitting

1 2 ... 13 14 15 16 17 18 19 20 21

Keine Kommentare

Mercury XR2 Installationshandbuch Seite 18